|
Three-dimensional models
Three-dimensional models
Sometimes, after the reading material and survey of drafts, the reader nevertheless has
a unintelligible device either appearance of any equipment or element, however it would be
very necessary to take a look at interesting unit from different sides. Now, using a Metastream technology from
Metacreations corporation, site offers not only to read about devices of the railway and
electrosupply, but also "to feel" them (that's mean to rotate, to scale, to move
on a screen). And the loading of device or unit goes at once while connection, and the
miscalculation of an image happens on your PC. It allows to build rather complicated
models, which are loaded faster than VRML.
If you'd like to work with 3D models it's necessary to install plug-in for browser
about 320 kb size. You can load it immediately from
Metastream
(Viewpoint).
- Metastream = Viewpoint. Details: "New
York, NY - October 16, 2000 - Metastream Corporation, an operating subsidiary of
MetaCreations Corporation (Nasdaq:MCRE) and a leading provider of super-rich Web solutions
for e-commerce, today announced the official name change of Metastream Corporation to
Viewpoint Corporation".....read.
The requirements for your PC:
· Windows 95, 98, 2000 or NT
· Netscape Navigator 4.07 or later
· Microsoft Internet Explorer 4.x or later
· 256 color display (24-bit recommended)
· 28.8Kbps modem
· 5 MB free disk space
· 32MB RAM (64mb recommended)
· Pentium 166 or faster (Pentium II recommended)
Appearance of a model? |
What this? |
File size |
|
Reconstruction of the Ternopol station, having as the
initial information only 2 photos of station made in a start of past century. In details..... |
88 kb |
|
Steam locomotive wheel pair (fragment). The author: site 3D-Cafe |
12 kb |
|
Electric lamp. |
4 kb |
|
Car E (81-74) The author: Driver |
71 kb |
|
Car axle-box The author: Driver |
16 kb |
|
Model of a steam locomotive The author: site 3D-Cafe |
36 kb |
|
PCC train The author: site 3D-Cafe - Matt Harter |
128 kb |
|
Permanent way The author: site 3D-Cafe |
12 kb |
|
TRDP-12500/10 - Triple-wound
transformer, voltage of windings 11/1,3/1,3 Draft: Denis Smirnov (Russian version). |
18 kb |
|
TDTN-25000/220 - Transformer,
voltage of windings 110/15/1,3/1,3. Draft: Denis Smirnov (Russian version). |
18 kb |
|
TDTN 25000/220 -
Transformer was installed on traction substation of electrified railways, feeding from
lines -220 kV Draft: Denis Smirnov (Russian version). |
24 kb |
|
TDTNG
25000/220 - Transformer was installed on traction substation of electrified
railways, feeding from lines -110 kV. |
140 kb |
|
Hanging porcelain
insulator |
15 kb |
|
Supporting
shackle insulator |
14 kb |
|
The single-phase
electrical meter |
21 kb |
|
Piece of a
contact wire (MF-85, copper, shaped with a cut 85 square mm.). |
1,7 kb |
What do you think about this models? Write down please.
In further plans - creation of diverse models of
devices and units of the railway, and also the use them as the additional explanations in
section " How works the railway? (for beginner) ".
|